Maintenance Manual

Managing the System
Administration
Cisco Small Business NSS300 Series Smart Storage Administration Guide 96
3
STEP 4 In the UDP Port field, enter the UDP port number used to transmit syslog
messages. Default is 514.
STEP 5 Select the logs to record.
• System Event Logs—Enable to record the system event logs.
• System Connection Logs—Enable to record the system connection logs.
You must enable and configure the syslog server from Application Servers
> Syslog Server in order to use this feature.
STEP 6 Click Apply to save the syslog settings.
Firmware Upgrade
From the Administration > Firmware Upgrade window, you can view the current
firmware version and update the firmware on the NAS. The current NAS settings
will not change while performing the firmware version update.
!
CAUTION As a precautionary measure, backup the NAS system configuration before
upgrading the firmware.