Maintenance Manual

Managing the System
Application Servers
Cisco Small Business NSS300 Series Smart Storage Administration Guide 221
3
Backup Server
From the Application Servers > Backup Server window, you can configure the
settings for backup from a local (NAS) server to a Rsync or RTRR (NAS) server, or
backup from a Rsync or RTRR (NAS) server to a (NAS) local server.
RSYNC Server
By using this function, you can backup the data on the local NAS to a remote NAS
server, and also allow backup from a remote NAS to the local NAS.
To configure the Rsync server settings:
STEP 1 Choose Application Servers > Backup Servers > Rsync Server from the
Navigation menu. The Backup Server Rsync Server window opens.
STEP 2 Enter the parameters in Rsync Server Settings:
• Port Number—Specify a port number for remote replication. The default
port number is 873.
• Enable backup from a remote server to the local host—Check this option
to allow the remote server to back up data to the local host (NAS) via remote
backup protocol.
• Allow remote Rsync server to back up data to NAS—Check this option to
allow the remote server to back up data to the local host (NAS) via Rsync
protocol.