Maintenance Manual

Managing the System

Application Servers

Cisco Small Business NSS300 Series Smart Storage Administration Guide 214

To enable the syslog server:

STEP 1 Choose Application Servers > Syslog Server from the Navigation menu. The

Syslog Server Configuration window opens.

STEP 2 Click Enable Syslog Server to enable the Syslog Server.

STEP 3 Enable UDP is automatically activated on port 514. You can change this to a

different port by entering a different port number. You can also enable TCP by

clicking on Enable TCP which uses TCP port 514 by default. You can change this

to a different port by entering a different port number.

STEP 4 Enter a maximum size (in MB) for the logs in Maximum Log Size.

STEP 5 In Log File, specify a directory location for the logs to be saved.

STEP 6 If you would like email notification of log messages, click Enable the email

notification and specify the severity level of the logs you wish to receive.

STEP 7 Click Apply. The syslog server settings are updated to the NAS.