Maintenance Manual

Managing the System
Network Shares
Cisco Small Business NSS300 Series Smart Storage Administration Guide 154
3
To enable advanced folder permissions:
STEP 1 Choose Network Shares > Share Folders > Advanced Options from the
Navigation menu. The Advanced Options window opens.
STEP 2 Click Enable Advanced Folder Permissions to enable advanced folder
permissions.
STEP 3 Click Apply, then Yes to continue.
NOTE If the NAS is rebooted during this process, the process will start over after reboot.
You can stop the process by disabling the advanced folder permission.
STEP 4 From the Share Folder window, select the Folder Name and click the Folder
Permissions icon.
STEP 5 Select the shared folder and set the following parameters:
• Special Access—Allows the user to be identified as “admin” and is used for
administration. If Special Access is selected, you must specify Read Only or
Read/Write. The Special Access column is visible only if the shared folder is
selected and is not visible if a subfolder is selected.
• Guest Access Right—From the drop-down list, select the guest access
permission (Read Only, Full Access, Deny Access).
• Owner—Displays the owner of the selected folder. Click the Edit icon next to
the owner to change the owner.
NOTE When the owner is changed on the selected folder, the owner change
applies only to the selected folder, not the subfolders. This is to avoid any
interference with the current quota settings.