Maintenance Manual

Managing the System
Disk Management
Cisco Small Business NSS300 Series Smart Storage Administration Guide 140
3
- Formatting—The disk is being formatted.
- Unmount—Failed to mount the remote disk. Could be due to the disk not
formatted yet or the file system is not EXT3.
- Disconnect—The remote target is disconnected.
• Create a share folder for the virtual disks—Click to create a share folder
for the virtual disks. See Share Folders, page 142.
Action Icons
In the Virtual Disk List window, there are a number of actions that you can perform
on each virtual disk as described below.
Action Icon Description
Modify Click this icon to modify the authentication information for
this virtual disk.
Format Click this icon to format this virtual disk to FAT, FAT32,
EXT3, EXT4, or HFS+ file system.
NOTE: All disk data will be removed during the format.
Connect Click this icon to connect this virtual disk
Disconnect Click this icon to disconnect this virtual disk.
Delete Click this icon to remove this target. All of its virtual disks
and share folders will be removed.