Maintenance Manual

Managing the System
Disk Management
Cisco Small Business NSS300 Series Smart Storage Administration Guide 126
3
Maximum iSCSI Targets and LUNs
A maximum of 256 iSCSI targets and LUNs (Logical Unit Number) can be created.
For example, if you create 100 targets on the NAS, the maximum number of LUNs
you can create is 156. Multiple LUNs can be created for each target. However, the
maximum number of concurrent connections to the iSCSI targets supported by
the NAS varies depending on your network infrastructure and the application
performance. Too many concurrent connections may slow down the performance
of the NAS.
iSCSI Quick Configuration Wizard
From the Disk Management > iSCSI window, you can enable iSCSI and create an
iSCSI target list using the Quick Configuration Wizard.
To run the iSCSI Quick Configuration Wizard and configure the iSCSI target
service on the NAS:
STEP 1 Choose Disk Management > iSCSI from the Navigation menu. The Portal
Management window opens.
STEP 2 Click Enable iSCSI Target Service and enter an iSCSI Service Port number. The
default service port is 3260.
STEP 3 Optionally, click Enable iSNS to enable Internet Storage Name Service (iSNS) and
enter the iSNS Server IP address.
STEP 4 Click Apply to save the settings.