Maintenance Manual

Managing the System
Disk Management
Cisco Small Business NSS300 Series Smart Storage Administration Guide 121
3
When migration is in process, the required time and total drive capacity after
migration are displayed in the Description field. After migration completes, the
new drive configuration is displayed and the status is Ready. You can use the new
drive configuration.
To configure a spare drive:
STEP 1 Prepare a drive of the same format and same capacity (or larger) as an existing
drive in the RAID configuration. The drive configuration status must be Ready.
STEP 2 Choose Disk Management > RAID Management from the Navigation menu. The
RAID Management window opens.
STEP 3 Select a volume to have a spare drive added to it and click Configure Spare Drive.
STEP 4 Select a drive to be added to the volume that you previously selected and click
Configure Spare Drive. When you add a spare drive, all the data on the selected
drive will be deleted during this process. Click OK to proceed.
After the configuration completes, the drive configuration is updated and the
status is Ready. You can use the drive configuration.
HDD SMART
The Disk Management > HDD SMART windows enables users to monitor hard
drive health, temperature, and usage status by the hard disk S.M.A.R.T. mechanism.