Product specifications

Deploying a Converged Storage Network Using a Cisco FCoE Switch
25
CAUTION! —Do not replace any of the SFP+ connectors. Doing so will void the warranty or
serviceability of the converged network adapter.
Table 2 lists the features and specifications for this adapter.
TABLE 2 CONVERGED NETWORK ADAPTER FEATURES AND SPECIFICATIONS
FEATURE
DESCRIPTION
Form factor
Standard low-profile form factor
Connector types
SFP+ SR optics
SFP+ direct-attach twin-axial copper
PCIe specification compliance
PCI Express Card Version 2.0 Electromechanical Specification
PCI training configurations
PCI Express Gen 2 x4 logical slot or PCI Express Gen 1 x8 logical slot
PCIe hot-plug and hot swap functionality
Supported maximum power
consumption
11 watts
Oracle Solaris Dynamic
Reconfiguration (DR)
Supports Dynamic Reconfiguration, a software mechanism that allows resources to be attached
(logically added) or detached (logically removed) from Oracle Solaris control without incurring any
system downtime
FCoE full offload in hardware
requirement
Meets this requirement
Boot support (Ethernet and
FCoE)
For all operating systems (see Table 3)
Receive side scaling (RSS)
Supported
MSI-X (message signaled
interrupts)
Supported
Fibre Channel support
Support for dual-port FCoE compatible with:
 Fibre Channel Generic Services (FC-GS-3)
 Fibre Channel Tape and Medium Changers (FC-Tape)
 Fibre Channel Protocol for SCSI (FCP-3-SCSI)
 Fibre Channel Switch Fabric (FC-SW-4)
 Fabric Provided MAC Address (FPMA) support
 FCoE boot code for all supported operating systems