Product specifications

Deploying a Converged Storage Network Using a Cisco FCoE Switch
15
2. Reboot the servers to discover the assigned LUNs.
On the SPARC Enterprise M5000 Server, the following command is an intermediate check to
ensure that the hardware is seeing the LUNs in a preboot environment. The following information
is the LUN portion obtained from the SPARC Enterprise M5000 Server NVRAM display.
SPARC Enterprise M5000 Server, using Domain console
Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights
reserved.
Copyright (c) 2010, Oracle and/or its affiliates and Fujitsu
Limited. All rights reserved.
OpenBoot 4.24.15, 65536 MB memory installed, Serial #70949847.
Ethernet address 0:14:4f:3a:9b:d7, Host ID: 843a9bd7.
Aborting auto-boot sequence.
{0} ok show-devs
/pci@13,700000
:
:
:
/packages
/pci@12,600000/SUNW,qlc@0,3
/pci@12,600000/SUNW,qlc@0,2
/pci@12,600000/ethernet@0,1
/pci@12,600000/ethernet@0
/pci@12,600000/SUNW,qlc@0,3/fp@0,0
/pci@12,600000/SUNW,qlc@0,3/fp@0,0/disk
/pci@12,600000/SUNW,qlc@0,2/fp@0,0
/pci@12,600000/SUNW,qlc@0,2/fp@0,0/disk
:
:
:
/packages/SUNW,probe-error-handler
{0} ok
3. After booting Oracle Solaris on both systems, verify that the server operating system and the
management application can discover the assigned LUNs. Verify the LUNs are present with the FC
info HBA-port command. Two approaches can be used. Native Oracle Solaris commands can be
entered or the SANsurfer CLI can be used.
The following Oracle Solaris commands would be performed once on the Sun Fire server and once
on the SPARC Enterprise M5000 Server.
SCX4450-BRM-03# fcinfo hba-port
HBA Port WWN: 210000c0dd1460c9
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3681-01
Firmware Version: 05.04.03
FCode/BIOS Version: BIOS: 2.14; fcode: 3.10; EFI: 3.20;
Serial Number: 0402A00-1006527597
Driver Name: qlc