Product specifications

Deploying a Converged Storage Network Using a Cisco FCoE Switch
11
4. Create a virtual Fibre Channel interface.
switch(config)# interface vfc101
switch(config-if)# bind interface ethernet 1/1
5. Map VFC to VSAN.
switch(config)# vsan database
switch(config-vsan)# vsan 3 interface vfc101
6. Configure VLAN on the physical Ethernet port.
switch(config)# interface ethernet 1/1
switch(config-if)# spanning-tree port type edge trunk
switch(config-if)# switchport mode trunk
switch(config-if)# switchport trunk allowed vlan 1-3
7. Configure QoS and configure class maps.
switch(config)# class-map type qos class-nic
switch(config-cmap-qos)# match cos 0
switch(config)# class-map type queuing class-nic
switch(config-cmap-qos)# match qos-group 2
8. Create policy maps.
switch(config)# policy-map type queuing policy1
switch(config-pmap-nq)# class type queuing class-nic
switch(config-pmap-c-nq)# bandwidth percent 50
switch(config-pmap-nq)# class type queuing class-fcoe
switch(config-pmap-c-nq)# bandwidth percent 50
switch(config-pmap-nq)# class type queuing class-default
switch(config-pmap-c-nq)# bandwidth percent 0
9. Attach the system service policy.
switch(config)# system qos
switch(config-sys-qos)# service-policy type queuing policy1
10. (Optional) Restore default system service policies, if desired. This will reset to 50/50 traffic.
switch(config)# system qos
switch(config-sys-qos)# service-policy type qos input default-in-
policy
switch(config-sys-qos)# service-policy type network-qos default-nq-
policy
switch(config-sys-qos)# service-policy type queuing output default-
out-policy
switch(config-sys-qos)# service-policy type queuing input default-
in-policy
11. Verify the QoS configuration.
switch# show class-map
switch# show policy-map
switch# show policy-map system