Technical References

Enables collection of enhanced statistics counters by the DHCP
server, which are then available with DHCP server statistics.
The enhanced counters provide more detailed information, but
cost the server some performance to maintain. Currently, this
enables collecting milliseconds ACK/Reply latencies (instead
of second based) and scope aggregation data (even if not
explicitly configured).
equal-priority-most-available bool default = disabled
Controls address allocation among scopes in the same network.
This attribute determines how the DHCP server allocates an
address to a new client when multiple scopes have the same
nonzero allocation priority. Default is false (disable).
If disabled, the server uses the scope with the fewest available
addresses to allocate an address to a new client (if not in a
limitation list).
If enabled, the server uses the scope with the most available
addresses to allocate an address to a new client
(if not in a limitation list).
In either case, if a client is in a limitation list,
among those scopes of the same priority, the one that contains
other clients in the same list is always used.
expression-configuration-trace-level int default = 2
Sets the trace level to use when configuring DHCP expressions.
Default is 2 (failure retry).
The range is from 0 through 6, with 0 being the lowest amount
of tracing and 6 the highest:
0 No additional tracing
1 No additional tracing
2 Failure retry
3 Function definitions
4 Function arguments
5 Variable lookups and literal details
6 Everything
Setting a high expression-configuration-trace-level imposes no
performance penalty, since expressions are configured only
when you restart the server.
expression-trace-level int default = 2
Sets the trace level to use when executing DHCP expressions.
ptional, default 2.
The range is from 0 through 6, with 0 being no tracing and 6 the
highest amount of tracing:
0-No tracing
1-Failures, including those protected by (try ...)
2-Total failure retries (with trace level = 6 for retry)
3-Function calls and returns
4-Function arguments evaluated
5-Print function arguments
6-Datatype conversions (everything)
Setting this attribute to any level other than 0, 1, or 2
imposes a considerable performance penalty.
The setting of 1 only traces when there is a failure in an
expression. The default setting of 2 re-executes