Technical References

poll-replica-offset time default = 4h
Sets a fixed time of day for replica polling.
This time is interpreted as a time of day offset, with 0 being
12 midnight, provided that:
the polling interval is less than 24 hours, and
the offset value is less than the polling interval.
If the offset value is greater than the polling interval, or
the interval is greater than 24 hours, the offset is ignored.
The scheduler for polling ensures that the first polling event
occurs at the offset time. For example, if you set the interval
to 4 hours and the offset to 2am, the polling would occur at
2am, 6am, 10am, 2pm, 6pm and 10pm.
poll-subnet-util-interval rangetime(0-1y)
Specifies how often to collect subnet utilization data from
the DHCP server for this cluster. If set to 0, polling does
not occur.
poll-subnet-util-offset rangetime(0-24h)
Provides a fixed time of day for subnet utilization polling.
This time is interpreted as a time of day offset, with 0 being
12 midnight, provided the polling interval is less than 24 hours,
and the offset value is less than the polling interval. If the offset
value is greater than the polling interval, or the interval is
greater than 24 hours, the offset will be ignored.
The scheduler for polling will ensure that the first polling event
occurs at the offset time. For example, if you set the interval to
4 hours and the offset to 2am, the polling would occur at 2am, 6am,
10am, 2pm, 6pm and 10pm.
poll-subnet-util-retry rangeint(0-4)
Controls how often to retry if subnet utilization polling fails.
product-version pcv
The product version number of the cluster in major, minor, rev form.
This value is updated when the cluster is resynchronized.
remote-id short
Sets the ID on the remote cluster that refers back to the
local cluster. If there are two cluster objects on two servers
that share a secret and refer to each other, then the local ID =
the remote-id, the local remote ID = the remote ID, and the value
of the local shared secret = the value the remote shared secret.
replication-initialized bool default = false
Indicates whether data replication has already been initialized
on this cluster.
restore-state enumshort default = active, transient
Indicates whether the cluster has been deactivated or is in the
process of being restored from the replica db.
scp-port int
Controls the port number used for SCP communications.