Technical References

Network Registrar
CLI Reference Guide
CLI Codes and Formats
Status Returns
Network Registrar Error Codes
Import and Export File Formats
Status Returns
The nrcmd program returns status information on the first line of information written to the standard output
stream. If there is more data, nrcmd displays this information on additional lines.
The first line consists of a numeric status that is followed by a human-readable error status.
The status codes are all three-digit integer decimal numbers. The range 100 through 599 is grouped as in
Table 4-1.
Table 4-1. Status Codes
Value Description
100-199 Normal return
200-299 Informational (warning)
300-499 Error
500-599 Fatal Error
For anything other than an error, Network Registrar assumes that the requested operation was completed;
however, some warning messages signal a condition that must be corrected. Unless a fatal error occurs,