Technical References

restrict-xfer-acl amelist
Configures the access control list that designates which devices
receive zone transfers from the specified zone. Use with the
restrict-xfer attribute if use-server-settings is set.
zone-template
zone-template - Configures a zone template
Synopsis
zone-template <name> create [<attribute>=<value> ...]
zone-template <name> delete
zone-template <name> set <attribute>=<value> [<attribute>=<value> ...]
zone-template <name> get <attribute>
zone-template <name> unset <attribute>
zone-template <name> disable <attribute>
zone-template <name> enable <attribute>
zone-template <name> show
zone-template <name> create clone=<clone-name>
zone-template <name> apply-to [all | <zone1>[,...]
Description
The zone-template command lets you configure templates to use
when creating zones.
Examples
Status
See Also
zone
Attributes
checkpoint-interval rangetime(60m-1w) default = 3h
Sets the number of seconds that elapse between saves of zone data.
When the interval expires, Network Registrar takes a snapshot of
the zone data and records it in the zone checkpoint database.
checkpoint-min-interval rangetime(60s-45m)
Controls the minimum time required (in seconds) between the
time the first zone checkpoint occurs and the second zone
checkpoint starts. This attribute applies only to zones with
dynamic rrs.
defttl rangetime(0-68y5w3h14m7s) default = 24h, required