Technical References

Sets the contents of DHCP option-82 (relay-agent-info) remote-id
(sub-option 2) to be the value of the cable-modem's MAC address.
When using the CMTS source-verify capability, a DHCPv4 leasequery
response must contain a valid option-82 with the cable-modem's MAC
address in the remote-id (sub-option 2). If you configure the
cable-modem's MAC address in this attribute, it will be used to create
the remote-id in a relay-agent-info option whenever there isn't a
relay-agent-info option available from the lease state database
reflecting an actual relay-agent-info option sent in by an actual DHCP
client. This would be the case if the lease was statically allocated.
description string
Describes the device that this reservation object represents.
device-name string
Displays the name of the device represented by this
reservation object.
include-tags string
Displays the selection criteria for this reservation.
ipaddr ipaddr required,immutable
Displays an IP address within the network that the scope specifies
and that contains the reservation.
lookup-key blob
Specifies the sequence of bytes that is the key for this reservation
object. The type for this key is set in the lookup-key-type attribute.
lookup-key-type int
Identifies the data dictionary type for the value in the
lookup-key attribute. It may take on the values of AT_NSTRING,
AT_BLOB, or AT_MACADDR.
scope nameref(Scope)
Identifies the scope for this reservation. On local clusters,
a parent scope must exist and this attribute must always be set.
On regional clusters, this attribute may be unset, pending
a push operation to the local cluster.
vpn-id int default = 0, immutable
Displays the identifier of the VPN that contains this reservation.
reservation6
reservation6 - Configures DHCPv6 reservations
Synopsis