Technical References

deactivated
Examples
report
report file=myreport.txt
Status
See Also
export addresses, lease-notification, session current-vpn
Report Keywords
column-separator
Specifies the character string you want used between the
columns in the report. The default is a single space. If
you specify more than one space, you must use a backslash
(\) to allow the extra spaces, and if you enter the spaces
on the command line, use quotation marks.
dhcp-only
Provided for command-syntax compatibility with prior versions,
specifies a summary of the DHCP server information.
This is the only option available for the report command,
and is no longer required to run the command.
dhcpv4
Displays ipv4 utilization.
dhcpv6
Display ipv6 utilization.
file
Specifies the filename to which the report command writes
the output. If you do not specify a filename, the report
command writes to 'standard out'.
vpn
The VPN address space from which to select scopes to examine
when executing this command. If no vpn-name is specified,
then the session's current-vpn is used. If the reserved
vpn-name "global" is used, then the global (or unnamed)
VPN address space is used. The reserved vpn-name "all" is not
allowed for this command, because the report command has no
mechanism to distinguish identical IP addresses in different
VPNs.
reservation