Technical References

summarizes the data from all the subnets.
Each row lists the following information:
o Subnet/Mask
o Scope Name
o %Free - percentage of dynamic addresses available to be leased
o Total Dynamic - total number of addresses configured,
excluding reservations
o Total Reserved - total reserved addresses
o Leased - addresses actively leased by clients
o Avail - addresses available to be leased
o Other Avail - addresses set aside to be leased by this server's
failover partner
o Pending Avail - leases not available to be leased because the
server is in the communications-interrupted failover state.
o In Transition - leases offered to clients or waiting for the
configured grace period before again becoming available
o Reserved Active - reserved addresses actively leased by clients
o Unavail - addresses marked unavailable
o Active Deactivated - leased addresses that have been
administratively deactivated
o Deactivated - addresses that have been administratively
deactivated
The output for the report dhcpv6 command is a table consisting of
column-aligned data for each defined prefix. If requested, totals
will be computed for each parent prefix defined in the address tree.
Separate total lines will be shown for child prefixes classified
for prefix delegation or dhcp allocation. No counters apply for
stateless configuration or infrstructure entries. The only attribute
that may be reported is whether the prefix has been deactivated.
Total lines will be skipped if the prefix-count for a given type
is 0.
Each row lists the following information:
o Prefix/Mask
o Prefix Name
o Total Reserved - total number of reserved leases configured
in this prefix
o Leased - addresses actively leased by clients
o Revoked - dynamic leases (leases that are not reserved) that
are no longer usable by the client, but that may still be in use
o In Transition - leases offered to clients or waiting for the
configured grace period before again becoming available
o Reserved Active - reserved addresses actively leased by clients
o Reserved Inactive - reserved addresses not used by their assigned
DHCP clients
o Reserved Unavail - reserved addresses marked unavailable
o Unavail - addresses marked unavailable
o Active Dynamic - total number of dynamic leases actively in
use
o Active Deactivated - number of dynamic and reserved leases
currently leased by DHCP clients, but have also been
administratively deactivated
o Deactivated - addresses that have been administratively