Technical References

link <name> listPrefixNames
link <name> applyTemplate <template-name> [<template-root-prefix>]
Description
The link command configures IPv6 network links. Links
group IPv6 prefixes (see the prefix command) together.
Links are required if multiple prefixes share the same
physical link.
When creating a link using a template, specify - for the
<name> to allow the link template's link-name-expr to name
the link.
Examples
Status
See Also
link-template, prefix
Attributes
description string
Describes the link.
embedded-policy obj(0)
Refers to a policy embedded within a single specific link object
used when replying to clients.
free-address-config nameref(AddrTrapConfig)
Identifies which trap captures unexpected free address events
on this Link.
If this attribute is not configured, the server looks for
the v6-default-free-address-config on the DHCPServer object.
local-cluster oid
Identifies the local DHCP cluster or failover pair
for this regional link.
name string required,unique,immutable
Provides user-assigned name for the link.
owner nameref(CCMOwner)
Identifies the owner of this link, referenced by name. Owners
can be used to limit administrative access by owner.
policy nameref(Policy) default = default
Refers to a shared policy used when replying to clients.