Technical References

Specifies which server to poll first:
0 main server
1 backup server
safe-period time default = 24h
Controls the safe period, in seconds. It does not have to be
the same on both main and backup servers. It only has meaning
if use-safe-period is enabled. Define this attribute on the
main server. If it is defined on a backup server, it is ignored
(to enable copying of configurations).
scopetemplate oid
Associates a scope template with a specified failover pair.
use-safe-period bool default = disabled
Controls whether a server can enter PARTNER-DOWN state without
an operator command. If disabled, a server never enters
PARTNER-DOWN without an operator command.
Define this attribute on the main server. If it is defined
on a backup server, it is ignored (to enable copying of
configurations).
group
group - Configures a named group of administrators
Synopsis
group <name> create [<attribute>=<value>]
group <name> delete
group list
group listnames
group <name> show
group <name> set <attribute>=<value> [<attribute>=<value> ...]
group <name> get <attribute>
group <name> unset <attribute>
group <name> enable <attribute>
group <name> disable <attribute>
Description
The group command configures the specified group of administrators.
Administrator groups are used to associate an admin to one or
more roles that control access to operations and data.
Examples
Status
See Also