Datasheet

Data Sheet
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 12
Specification Standard
●
EN 60950
●
IEC 60950
●
TS 001
●
AS/NZS 3260
EMC
●
FCC Part 15 (CFR 47) Class A
●
ICES-003 Class A
●
EN55022 Class A
●
CISPR22 Class A
●
AS/NZS 3548 Class A
●
VCCI Class A
●
EN 55022
●
EN 55024
●
EN 61000-6-1
●
EN 50082-1
●
EN 61000-3-2
●
EN 61000-3-3
●
ETS 300 386
Industry EMC, safety, and
environmental standards
●
NEBS Level 3
●
ETS 300 019 Storage Class 1.1
●
ETS 300 019 Transportation Class 2.3
●
ETS 300 019 Stationary Use Class 3.1
●
ETS 300 386
Telecom (E1)
●
CTR 12/13
●
CTR 4
●
ACA TS016
Telecom (T1)
●
FCC Part 68
●
Canada CS-03
●
JATE Green Book
ROHS Compliance ROHS5
Power and MTBF Information
Table 10 gives power and MTBF information for different chassis
Table 10. Power and MTBF Info
Part Number Max Rated Power (W) Rated MTBF (Hours)
WS-C4503-E 60 1,064,279
WS-C4506-E 120 710,119
WS-C4507R+E 135 248,630
WS-C4510R+E 200 179,714
WS-C4507R-E 135 365,896
WS-C4510R-E 200 290,525
Note:
All power numbers shown in the table above are maximum values recommended for facility power and cooling
capacity planning. These figures are not indicative of the actual power draw during operation. Typical power draw is
about 20% lower than the maximum value shown.
Ordering Information
Table 11 lists the ordering information for chassis, power supplies, supervisor engines, and memory that are
commonly used with the Cisco Catalyst 4500 Series.