Design Guide

Cisco Wireless IP Phone 8821 and 8821-EX Wireless LAN Deployment Guide

Tkip MIC Countermeasure Hold-down Timer....... 60

Cisco Meraki Access Points

When configuring Cisco Meraki access points, use the following guidelines:

• Enable 802.11r for WPA2-Enterprise or Pre-shared key

• Set Splash page to None

• Enable Bridge mode

• Enable VLAN tagging

• Set Band selection to 5 GHz band only

• Configure the Data Rates as necessary

• Configure Quality of Service (QoS)

Creating the Wireless Network

A wireless network must be created prior to adding any Cisco Meraki access points to provide WLAN service.

Select Create a new network from the drop-down menu.

Select Wireless for Network type then click Create.

Cisco Meraki access points can be claimed either by specifying the serial number or order number.

Once claimed, those Cisco Meraki access points will then be listed in the available inventory.