Manual

Cisco IOS In Service Software Upgrade Process
show redundancy
46
Cisco IOS Release 12.2(28)SB
Usage Guidelines Cisco AS5800
Use this command from the router-shelf console to determine when failover is enabled. Use this
command with the history keyword to log failover events.
Cisco AS5850
To use this command, the router must have two route-switch-controller (RSC) cards installed and must
be connected to one of them.
Examples The following example shows how to display information about the RF client:
Router# show redundancy clients
clientID = 0 clientSeq = 0 RF_INTERNAL_MSG
clientID = 25 clientSeq = 130 CHKPT RF
clientID = 5026 clientSeq = 130 CHKPT RF
clientID = 5029 clientSeq = 135 Redundancy Mode RF
clientID = 5006 clientSeq = 170 RFS client
clientID = 6 clientSeq = 180 Const OIR Client
clientID = 7 clientSeq = 190 PF Client
clientID = 5008 clientSeq = 190 PF Client
clientID = 28 clientSeq = 330 Const Startup Config
clientID = 29 clientSeq = 340 Const IDPROM Client
clientID = 65000 clientSeq = 65000 RF_LAST_CLIENT
The output displays the following information:
• clientID displays the client’s ID number.
• clientSeq displays the client’s notification sequence number.
• Current RF state.
The following example shows how to display information about the RF counters:
Router# show redundancy counters
Redundancy Facility OMs
comm link up = 0
comm link down down = 0
invalid client tx = 0
null tx by client = 0
tx failures = 0
tx msg length invalid = 0
12.2(17d)SXB Support for the user EXEC mode form of this command was extended to the
Supervisor Engine 2.
12.3(8)T The inter-device keyword was added to the privileged EXEC form of the
command.
12.3(11)T The user EXEC form of this command was integrated into Cisco IOS
Release 12.3(11)T.
12.2(28)SB This command was integrated into Cisco IOS Release 12.2(28)SB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
12.2(31)SGA This command was integrated into Cisco IOS Release 12.2(31)SGA.
Release Modification