Manual

Cisco IOS In Service Software Upgrade Process

show redundancy

Cisco IOS Release 12.2(28)SB

show redundancy

To display current or historical status and related information on planned or logged handovers, use the

show redundancy command in user EXEC or privileged EXEC mode.

Privileged EXEC Mode

states | inter-device]

User EXEC Mode

show redundancy {clients | counters | history | states | switchover}

Syntax Description

Command Modes User EXEC

Privileged EXEC

Command History

clients Displays the redundancy-aware client-application list.

counters Displays redundancy-related operational measurements.

debug-log (Optional) Displays up to 256 redundancy-related debug entries.

handover (Optional) Displays details of any pending scheduled handover.

history Displays past status and related information about logged handovers. This is

the only keyword supported on the Cisco AS5800.

switchover history Displays redundancy switchover history.

states Displays redundancy-related states: disabled, initialization, standby, active

(various substates for the latter two).

switchover Displays the switchover counts, the uptime since active, and the total system

uptime.

inter-device (Optional) Displays redundancy interdevice operational state and statistics.

Release Modification

11.3(6)AA This command was introduced in privileged EXEC mode.

12.2(8)T This command was integrated into Cisco IOS Release 12.2(8)T. Support for

the Cisco AS5800 and Cisco AS5850 is not included in this release.

12.2(8)MC2 This command was introduced in user EXEC mode.

12.2(11)T The privileged EXEC mode form of this command was implemented on the

Cisco AS5800 and Cisco AS5850.

12.2(14)SX The user EXEC mode form of this command was introduced on the

Supervisor Engine 720.

12.2(18)S This command was introduced on Cisco 7304 routers running Cisco IOS

Release 12.2S.

12.2(20)S The states, counters, clients, history, and switchover history keywords

were added.