Manual

1-, 2-, and 4-Port T1/E1 HWICs and 8-Port T1/E1 Network Module

How to Configure T1/E1 HWICs and Network Module

Cisco IOS Release 12.4(11)XW5, and 12.4(20)T

Step 11

cablelength long db-loss-value

cablelength short length

Example:

Router(config-controller)# cablelength short

133

T1 only. cablelength long attenuates the pulse from the

transmitter using pulse equalization and line build-out. This

command applies to cables longer than 660 feet. Loss

values are:

• 0db

• -7.5db

• -15db

• -22.5db

Default attenuation is 0db.

cablelength short sets transmission attenuation for cable

lengths of 660 feet or less. Cable lengths can be specified as

follows:

• 110 for cable lengths from 0 to 110 feet

• 220 for cable lengths from 110 to 220 feet

• 330 for cable lengths from 220 to 330 feet

• 440 for cable lengths from 330 to 440 feet

• 550 for cable lengths from 440 to 550 feet

• 660 for cable lengths from 550 to 660 feet

There is no default cable length.

Command or Action Purpose