Manual

Cisco Packet Data Serving Node (PDSN) Release 2.0
AAA Authentication and Authorization Profile
98
12.3(11)T
• Enable compression:
cisco-avpair = “lcp:interface-config=compress stac”
cisco-avpair = “lcp:interface-config=compress mppc”
cisco-avpair = “lcp:interface-config=compress predictor”
• Other Optional Parameters
Framed-Protocol = PPP
Framed-Routing = None
Service-Type = Framed
VPDN
cisco-avpair = vpdn:tunnel-type=l2tp
cisco-avpair = vpdn:ip-addresses=5.5.5.1
cisco-avpair = vpdn:l2tp-tunnel-password=cisco
The following configuration is optional at AAA contacted by LNS :
cisco-avpair = ip:addr-pool=pdsn-pool
MSID based Authentication
• (a)Simple IP case :
cisco-avpair = cdma:cdma-realm=cisco.com
cisco-avpair = lcp:cdma-user-class=1
• (b)Proxy Mobile IP Case :
cisco-avpair = lcp:cdma-user-class=3
cisco-avpair = cdma:cdma-realm=cisco.com
cisco-avpair = “lcp:spi#0 = spi 100 key ascii cisco”
cisco-avpair = lcp:cdma-ha-ip-addr=5.5.5.1
Proxy Mobile IP
cisco-avpair = lcp:cdma-ha-ip-addr=5.5.5.1
cisco-avpair = “lcp:spi#0 = spi 100 key ascii cisco”
cisco-avpair = lcp:cdma-user-class=3
Mobile IP
• cisco-avpair = lcp:cdma-user-class=2
The following attributes are optional, and are only needed for specific scenarios:
– Dynamic Home Agent Assignment :
CDMA-HA-IP-Addr = 6.0.0.2
– Download Security Association and static IP addresses (at Home Agent):
cisco-avpair = “mobileip:spi#0=spi 100 key ascii cisco”
cisco-avpair = “mobileip:static-ip-addresses=20.0.0.1 20.0.0.2 20.0.0.3 20.0.0.4”