Manual

Cisco Packet Data Serving Node (PDSN) Release 2.0
Configuration Examples
77
12.3(11)T
ip subnet-zero
ip cef
!
!
!
interface Loopback1
no ip address
!
interface GigabitEthernet0/0
no ip address
!
interface GigabitEthernet0/0.401
encapsulation dot1Q 401
ip address 10.121.68.76 255.255.255.0
standby 1 ip 10.121.68.98
standby 1 priority 120
standby 1 preempt
standby 1 name 6509-cluster
!
router mobile
!
ip classless
ip route 10.10.72.1 255.255.255.255 10.121.68.72
ip route 10.10.73.1 255.255.255.255 10.121.68.73
ip route 10.10.74.1 255.255.255.255 10.121.68.74
ip route 10.10.75.1 255.255.255.255 10.121.68.75
ip route 10.10.92.1 255.255.255.255 10.121.68.92
ip route 10.10.93.1 255.255.255.255 10.121.68.93
ip route 10.10.94.1 255.255.255.255 10.121.68.94
ip route 10.10.95.1 255.255.255.255 10.121.68.95
ip route 128.0.0.0 255.255.255.0 GigabitEthernet0/1
no ip http server
ip pim bidir-enable
!
!
!
cdma pdsn secure pcf 10.121.68.62 10.121.68.66 spi 100 key ascii cisco
cdma pdsn secure pcf 10.121.68.82 10.121.68.86 spi 100 key ascii cisco
cdma pdsn secure cluster default spi 100 key ascii user
cdma pdsn cluster controller interface GigabitEthernet0/0.401
cdma pdsn cluster controller standby 6509-cluster
cdma pdsn cluster controller timeout 10
cdma pdsn cluster controller window 3
!
line con 0
line vty 0
no login
line vty 1 4
login
line vty 5 15
login
!
end
S76#
cat6500 router#session slot 9 processor 6
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 127.0.0.96 ... Open
S96>
Press RETURN to get started!