Manual

Cisco Packet Data Serving Node (PDSN) Release 2.0
Attributes
102
12.3(11)T
interface-config 26/1 Cisco >=3 string User-specific AAA interface
configuration information with Virtual
Profiles.
The information that follows the equal
sign (=) can be any Cisco IOS interface
configuration command.
No Yes
spi 26/1 Cisco >=3 string Carries authentication information
needed by the home agent for
authenticating a mobile user during
MIP registration.
Provides the Security Parameter Index
(SPI), key, authentication algorithm,
authentication mode, and replay
protection timestamp range.
The information is in the same syntax
as the ip mobile secure host addr
configuration command. Essentially, it
contains the rest of the configuration
command that follows that string,
verbatim.
IP-Pool-Definition 26/21
7
Cisco >=3 string Defines a pool of addresses using the
format: X a.b.c Z; where X is the pool
index number, a.b.c is the pool’s
starting IP address, and Z is the number
of IP addresses in the pool.
For example, 3 10.0.0.1 5 allocates
10.0.0.1 through 10.0.0.5 for dynamic
assignment.
No Yes
Assign-IP-Pool 26/21
8
Cisco 4 integer Assign an IP address from the
identified IP pool.
No Yes
Link-Compression 26/23
3
Cisco 4 integer Link compression protocol to be used.
Supported values are:
• 0: None
• 1: Stac
• 2: Stac-LZS
• 3: MS-Stac
No Yes
Table 5 Table 5.Authentication and Authorization AVPs Supported by Cisco IOS (continued)
Authentication and
Authorization AVPs
Supported By Cisco IOS
Name Type Vendor Length Format Description
Allowed In
Access Access
Request Accept