Manual

Layer 2 Tunnel Protocol Version 3
debug vpdn
86
Cisco IOS Releases 12.0(29)S and 12.2(25)S
23:31:18: Tnl58458 L2TP: Tunnel state change from idle to wait-ctl-reply
23:31:18: Tnl58458 L2TP: SM State wait-ctl-reply
23:31:18: Tnl58458 L2TP: I SCCRP from router
23:31:18: Tnl58458 L2TP: Tunnel state change from wait-ctl-reply to established
23:31:18: Tnl58458 L2TP: O SCCCN to router tnlid 8012
23:31:18: Tnl58458 L2TP: Control channel retransmit delay set to 1 seconds
23:31:18: Tnl58458 L2TP: SM State established
23:31:18: Tnl/Sn58458/28568 L2TP: O ICRQ to router 8012/0
23:31:18: Tnl/Sn58458/28568 L2TP: Session state change from wait-for-tunnel to wait-reply
23:31:19: Tnl58458 L2TP: Control channel retransmit delay set to 1 seconds
23:31:20: %LINK-3-UPDOWN: Interface Ethernet2/1, changed state to up
23:31:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet2/1, changed state to
up
23:31:25: L2X: Sending L2TUN message <Connect OK>
23:31:25: Tnl/Sn58458/28568 L2TP: O ICCN to router 8012/35149
23:31:25: Tnl58458 L2TP: Control channel retransmit delay set to 1 seconds
23:31:25: Tnl/Sn58458/28568 L2TP: Session state change from wait-reply to established
23:31:25: L2X: l2tun session [1669204400], event [server response], old state [open], new
state [open]
23:31:26: Tnl58458 L2TP: Control channel retransmit delay set to 1 seconds
Related Commands Command Description
debug acircuit Displays events and failures related to attachment circuits.
debug xconnect Displays errors and events related to an Xconnect configuration.