Manual

Layer 2 Tunnel Protocol Version 3

Additional References

Cisco IOS Releases 12.0(29)S and 12.2(25)S

Standards

MIBs

RFCs

Configuring CEF “Cisco Express Forwarding” chapter in the Cisco IOS Switching

Configuration Guide, Release 12.0

MTU discovery and packet fragmentation MTU Tuning for L2TP

Tunnel Marking for L2TPv3 Tunnels QoS: Tunnel Marking for L2TPv3 Tunnels

Multilink Frame Relay over L2TPv3/AToM Multilink Frame Relay over L2TPv3/AToM

Additional VPN commands: complete command

syntax, command mode, defaults, usage guidelines and

examples.

Cisco IOS Release 12.0 Dial Solutions Command Reference

Additional Frame Relay commands: complete

command syntax, command mode, defaults, usage

guidelines and examples.

Cisco IOS Release 12.0 Wide-Area Networking Command Reference

UTI Universal Transport Interface (UTI)

IPv6 Cisco IOS IPv6 Configuration Library

Additional IPv6 commands: complete command

syntax, command mode, defaults, usage guidelines and

examples.

Cisco IOS IPv6 Command Reference

Standards Title

draft-ietf-l2tpext-l2tp-base-03.txt Layer Two Tunneling Protocol (Version 3)'L2TPv3'

MIBs MIBs Link

• VPDN MIB—MIB support for L2TPv3 is based on

the VPDN MIB

To obtain lists of supported MIBs by platform and Cisco IOS

release, and to download MIB modules, go to the Cisco MIB website

on Cisco.com at the following URL:

http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

RFCs Title

RFC 2661 Layer Two Tunneling Protocol “L2TP”