Manual

Layer 2 Tunnel Protocol Version 3
show l2tun tunnel
141
Cisco IOS Releases 12.0(29)S and 12.2(25)S
30866 IP 115 172.18.184.116 0 172.18.184.142 0
35217 IP 115 172.18.184.116 0 172.18.184.142 0
Table 12 describes the significant fields shown in the display.
The following example shows how to display information about the current state of L2TP sessions with
the local and remote host names of each session:
Router# show l2tun tunnel state
LocID RemID Local Name Remote Name State Last-Chg
26515 41814 Router tun1 est 03:13:15
30866 6809 Router tun1 est 03:13:15
35217 37340 Router tun1 est 03:13:15
Table 13 describes the significant fields shown in the display.
Related Commands
Table 12 show l2tun tunnel transport Field Descriptions
Field Description
Total tunnels Total number of tunnels currently established.
Total sessions Total number of sessions currently established.
LocID Local session ID.
Type Session type.
Prot Protocol type used by the tunnel.
Local Address IP address of the local tunnel endpoint.
Port Port used by the local tunnel endpoint.
Remote Address IP address of the remote tunnel endpoint.
Port Port used by the remote tunnel endpoint.
Table 13 show l2tun tunnel state Field Descriptions
Field Description
LocID Local session ID.
RemID Remote session ID.
Local Name Name of the local tunnel endpoint.
Remote Name Name of the remote tunnel endpoint.
State Current state of the tunnel.
Last-Chg Time since the state of the tunnel last changed, in the format hh:mm:ss.
Command Description
show l2tun session Displays the current state of a Layer 2 session and displays protocol
information about an L2TPv3 control channel.