Manual

Layer 2 Tunnel Protocol Version 3
protocol
124
Cisco IOS Releases 12.0(29)S and 12.2(25)S
Examples The following example shows how to enter pseudowire configuration mode, and how to configure
L2TPv3 as the signaling protocol. The control plane configuration used in the L2TP class named class1
will be used to create dynamic L2TPv3 sessions for a VLAN Xconnect interface:
Router(config)# pseudowire-class vlan-xconnect
Router(config-pw)# protocol l2tpv3 class1
Related Commands Command Description
pseudowire-class Specifies the name of an L2TP pseudowire class and enters pseudowire
class configuration mode.