Manual

Layer 2 Tunnel Protocol Version 3
match fr-de
118
Cisco IOS Releases 12.0(29)S and 12.2(25)S
match fr-de
To match packets with the Frame Relay discard eligibility (DE) bit set, use the match fr-de command
in class-map configuration mode. To remove the match criteria, use the no form of this command.
match fr-de
no match fr-de
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes Class-map configuration
Command History
Examples The following example creates a class called match-fr-de and matches packets with the Frame Relay DE
bit set.
Router(config)# class-map match-fr-de
Router(config-cmap)# match fr-de
Router(config)# exit
Related Commands
Release Modification
12.0(25)S This command was introduced for the Cisco 7500 series router.
12.0(26)S This command was implemented on the Cisco 7200 series router.
Command Description
set fr-de Changes the DE bit setting in the address field of a Frame Relay frame to 1
for all traffic leaving an interface.