Manual

Layer 2 Tunnel Protocol Version 3
ip local interface
101
Cisco IOS Releases 12.0(29)S and 12.2(25)S
Examples The following example shows how to configure the IP address of the local Ethernet interface named e0/0
as the source IP address for sending Ethernet packets through an L2TPv3 session:
Router(config)# pseudowire-class ether-pw
Router(config-pw)# ip local interface e0/0
Related Commands Command Description
pseudowire-class Specifies the name of an L2TP pseudowire class and enters pseudowire
class configuration mode.