Manual

2-17
ICM-to-ICM Gateway User Guide for Cisco ICM Enterprise & Hosted Editions Release 7.0(0)
Chapter 2 ICM-to-ICM Gateway Configuration
Server Configuration
Step 8 In the Create Single Physical Interface Controller section, specify an Enterprise
Name and, optionally, a Description.
Step 9 Click OK. The Physical Interface Controller tab appears, displaying the
information you specified, and an ID value of UNASSIGNED.
Step 10 Enter the following information in the Routing Client tab fields:
• Name. A name that will serve as the NIC Routing Client name. The name can
be up to 32 characters. The valid characters are upper-case and lower-case
letters, digits, periods (.) and underlines (_). The first character of the name
must be a letter or digit.
• Timeout threshold. The maximum time, in milliseconds, the routing client
can wait for a response to a routing request. The NIC sends a default response
slightly before this threshold.
• Late threshold. A threshold value, in milliseconds, for classifying responses
as late. Any response that exceeds this threshold is considered late even if it
does not exceed the Timeout Threshold.
• Timeout limit. The maximum time, in seconds, for which the routing client
waits for a response. This is the maximum time the routing client will tolerate
consecutive response timeouts before it stops sending requests to the ICM
software. If the routing client receives no responses from the ICM software
within this limit, it terminates routing operation.