Manual

Chapter 2 ICM-to-ICM Gateway Configuration
Defining Client ICM Configuration Data
2-6
ICM-to-ICM Gateway User Guide for Cisco ICM Enterprise & Hosted Editions Release 7.0(0)
Step 4 Specify the following values on the Attributes tab:
• Name. Enter a name for the ICM Gateway.
• Type. Choose Remote ICM.
• Preferred Side. Indicates the preferred side of the Gateway to use when both
are available. If only one side is available, ICM software uses that side
regardless of preference.
• Encryption. Indicates whether requests to the Application Gateway are
encrypted. Choose None.
• Fault Tolerance. If the Application Gateway is duplexed, specifies the
fault-tolerance strategy it uses. Choose None.
• Connection. Choose whether the Gateway is Duplex (has both a Side and
Side B connection), Simplex A (only has a Side A), or Simplex B (only has a
Side B).
• Description. (Optional.) Additional information about the gateway.
Step 5 Click the Save button to create the gateway.
Note Make a note of the Application Gateway ID value, as you will need it
when you run Setup to configure the INCRP NIC on the Server ICM.
Step 6 To set the connection information, click on the Connection Side A tab or the
Connection Side B tab.
Step 7 To specify an address, click on the Enter Address button. The Enter NAM
Addresses dialog box appears.