Manual

Chapter 2 ICM-to-ICM Gateway Configuration
Defining Client ICM Configuration Data
2-4
ICM-to-ICM Gateway User Guide for Cisco ICM Enterprise & Hosted Editions Release 7.0(0)
The Client ICM needs only a limited configuration (dialed numbers, labels, basic
routing scripts, etc.) while the instance-specific scripts, configuration, real-time,
and historical data are stored on the Server ICM.
To set up your Client ICM configuration, run Configuration Manager on a Client
ICM Admin Workstation.
For instructions on using Configuration Manager, refer to the ICM Configuration
Guide for Cisco ICM Enterprise Edition.
Create or Configure the Gateway Process on the Router
An Application Gateway process must be configured on the Client ICM for each
Server ICM that the Client ICM is going to communicate with.
Dialed Number Map Associates dialed numbers and calling line IDs with
Client ICM call types.
Label All labels that can be returned by associated Server
ICMs, plus those used for direct translation.
Network Interface
Controller
One required for the Network Interface Controller
to the carrier network.
Peripheral Gateway (PG) One or more for the Peripheral Gateway to the
carrier network.
Prefix Any prefixes used in Client ICM regions.
Region Any regions used in Client ICM dialed number
map.
Routing Client One or more for the carrier network.
Script One or more for each call type.
Table 2-1 Configuration Data on a Client ICM
Table Contents