Manual

Chapter 2 ICM-to-ICM Gateway Configuration
Client ICM Configuration
2-2
ICM-to-ICM Gateway User Guide for Cisco ICM Enterprise & Hosted Editions Release 7.0(0)
Client ICM Configuration
This section provides instructions for the configuration tasks you need to perform
on the Client ICM.
Identify the Client for the Server
To identify the ICM Gateway Client for the ICM Gateway Server, run a full ICM
Setup on the Client Router machine. For each ICM-to-ICM Gateway client, you
must perform the following steps.
Step 1 In the Router Properties screen, check the Remote Network Routing option box.
Step 2 Specify a NAM ID (Client ICM ID) number in the NAM ID box provided.