Maintenance Manual

Chapter 5 General Administration
Resynchronizing Databases
5-14
Cisco ICM Enterprise Edition Administrator Guide Release 6.0(0)
Synchronizing Databases from the Command Window
The following directions explain how to perform this copy from side A to side B
for a customer named CustX.
To copy CustX database from Side A to Side B:
Step 1 Stop the Side B Logger, if it is running.
Step 2 In a DOS Command window on the Side B Logger, change to the \icm directory.
Step 3 Run the following command:
install\syncloggers geoCustXlgrA CustX_SideA geoCustlgrB
CustX_SideB
Step 4 When prompted, verify that the configuration will be deleted from the correct
database and type Y to continue.
When the command completes, you can restart the side B Logger.
Synchronizing Databases with ICMDBA
To synchronize the data of two Logger databases:
Step 1 Start the ICMDBA tool from the Admin Workstation program group.
Step 2 Select a database from the main window and choose Synchronize from the Data
menu. The Synchronize window appears: