Maintenance Manual

Chapter 8 ICM Partitioning
Installing and Configuring ICM Partitioning
8-36
Cisco ICM Enterprise Edition Administration Guide Release 6.0(0)
How to assign business entity security access
Step 1 In the Business Entity List window, select the business entity.
Step 2 Click the Security tab.
Step 3 In the Security tab, click Add. The Add Users and Groups dialog box appears.
Step 4 In the Type box, select User or Group, depending on whether you want to give
access rights to a user or a group of users.
Step 5 In the Names list, select a User Name or Group Name to which you want to assign
access to the business entity.
You can select multiple names if you want to assign access to more than one user
or user group.
Step 6 From the Access type drop-down list (directly below the User Name and Group
Name lists), choose the level of access you want to assign: Read or Maintenance.
Step 7 Click OK. The Add Users and Groups dialog box disappears and the user name
or group name is displayed in the Security tab User Access list.
Step 8 Repeat steps 4 through 7 to give other Users/Groups access to the business entity.
Step 9 When you have finished assigning access, click Save to apply the changes.
Repeat this procedure to set the access rights for other business entities.
Defining Class Security Access
After you have created security groups, you can use the Class Security List tool
to grant each group a specific level of access to each ICM security class.
How to assign class security access
Step 1 From the Configuration Manager’s Configure ICM menu, choose Security >
Class List. The Class Security List window appears.
Step 2 In the Select filter data box, click Retrieve. The Class Security List window lists
the existing security classes.