Maintenance Manual

Chapter 7 Support Facilities
SNMP Feed
7-10
Cisco ICM Enterprise Edition Administrator Guide Release 6.0(0)
Note Beginning with ICM 6.0, the legacy SNMP agent that came with ICM 4.x
software is no longer supported.
Check the Enable suppression option to suppress repeat events. This feature
works exactly as does the suppression option for CSFS / DTP. It suppresses repeat
events based on the configuration of the “phone home” component.
Note Use DTP suppression for SNMP alarms. This matches the suppression
configured for phone home, if enabled. Otherwise the default of 5 repeat
events per hour is used.
Click the OK button.
Continue until the Logger setup is complete.
For information on the Logger setup, see the Cisco ICM Enterprise Edition
Installation Guide.
Windows 2000 SNMP Agent Configuration
The following Windows 2000 service is required to enable the exportation of ICM
traps via the ICM Extension Agent:
• the SNMP Service.
Note SNMP is always installed on Windows 2000 systems.
The SNMP Service must be configured to send SNMP traps to the desired
management stations.
To configure traps for the SNMP service: