Maintenance Manual

7-9
Cisco ICM Enterprise Edition Administrator Guide Release 6.0(0)
Chapter 7 Support Facilities
SNMP Feed
that object. The SNMP Extension Agent allows customers with an SNMP based
Network Management Station (NMS) such as Cisco Works 2000, HP OpenView,
CA Unicenter TNG, Tivoli Enterprise, or Aprisma Spectrum to receive SNMP
traps mapped to key EMS events.
Note In order to correctly interpret the Cisco generated trap messages, the ICM
SNMP MIB (ALARMEX.MIB) must be loaded into the NMS. Additionally, if
another product, such as the Cisco ISN system, is being monitored using this
extension agent, then the appropriate MIB for that product must be also be
loaded into the NMS.
The configuration of the SNMP Extension Agent is automated by ICM Setup.
To enable the SNMP feed on the Logger:
Step 1 Run ICM Setup. Select the Logger from the Customer Components list and click
the Edit button, or, if adding a new Logger, click the Add button and then click
the Logger button on the ICM Component Selection screen.
Step 2 Click Next from the Logger Properties window. The Logger Component
Properties window displays:
Step 3 In the SNMP Feed section, check the Enabled box.
Step 4 Click the Configure button. The SNMP Feed Configuration window displays.