Installation Guide

Click OK when you are nished with the Conguration dialog box. This accepts the information
that you entered, and returns you to the Peripheral Gateway Component Properties dialog box.
The specic Conguration dialog boxes are described in the following subsections.
See Also
For the Peripheral Gateway Component Properties dialog box, How to Set Peripheral Component
Gateway Properties (page 63).
How to Configure the ACP1000 PIM
Step 1
In the ACP1000 Conguration dialog box, to put the PIM into service, check the Enabled
option. This allows the PIM to communicate with the peripheral when the Peripheral Gateway
is running.
Step 2
In the Peripheral name eld, enter the Peripheral name from the Conguration Manager (use
the PG Explorer tool to view the Peripheral name).
Step 3
In the Peripheral ID eld, from the Peripheral record, enter the Peripheral ID value from the
Conguration Manager (use the PG Explorer tool to view the Peripheral ID).
Step 4
In the Supervisor Interface section, enter the TTY Link Port Number. The ACP1000 PIM
uses this link to obtain agent conguration information when the PIM starts up.
Step 5
In the ApplicationLink Interface section, select the type of interface you want to establish
between the PG and the host server.
The choices are:
TCP. Click this radio button if you want to congure an ethernet connection to the host
server. Enter the Host Name of the server and the TCP Port Number.
Named Pipe. Click this radio button if you want to congure a named pipe connection to
the host server. Enter the Pipe Name.
How to Configure the Alcatel A4400 PIM
Step 1
In the Alcatel A4400 Conguration dialog box, to put the PIM into service, check the Enabled
option. This allows the PIM to communicate with the peripheral when the Peripheral Gateway
is running.
Step 2
In the Peripheral name eld, enter the Peripheral name from the Conguration Manager (use
the PG Explorer tool to view the Peripheral name).
ICM Installation Guide for Cisco ICM Enterprise Edition Release 7.0(0)
69
Peripheral Gateway Setup
How to Configure the ACP1000 PIM