Installation Guide

Step 4
In the Address eld, enter the IP address or hostname for the SS7IN Gateway.
Step 5
In the Port eld, enter the TCP port to use for connection to the SS7IN Gateway.
How to Configure the Stentor NIC
Step 1
In the Stentor NIC Properties dialog box, enter the Physical controller ID value from the
Conguration Manager.
Step 2
For the other elds in the top part of the dialog box, the default values are usually appropriate.
Step 3
In the bottom part of the dialog box, ll in the specic information for each network ATfG that
communicates with the NIC.
How to Configure the TIM INAP NIC
Step 1
In the TIM INAP NIC Properties dialog box, enter the Physical controller ID value from the
Conguration Manager.
Step 2
For the other elds in the top part of the dialog box, the default values are usually appropriate.
Use the Gateway Properties section to enter values for each connection between the NIC and
the TIM INAP Gateway.
Step 3
In the Description eld, enter any descriptive text you want for the connection to the TIM INAP
Gateway.
Step 4
In the Address eld, enter the IP address or hostname for the TIM INAP Gateway.
Step 5
In the Port eld, enter the TCP port to use for connection to the TIM INAP Gateway.
ICM Installation Guide for Cisco ICM Enterprise Edition Release 7.0(0)
57
Network Interface Controller Setup
How to Configure the Stentor NIC