Installation Guide

How to Configure the Nortel NIC
Step 1
In the Nortel NIC Properties dialog box, enter the Physical controller ID value from the
Conguration Manager.
Step 2
For the other elds in the top part of the dialog box, the default values are usually appropriate.
Step 3
In the bottom part of the dialog box, ll in the specic information for each network SCP that
communicates with the NIC.
How to Configure the NTL NIC
Step 1
In the NTL NIC Properties dialog box, enter the Physical controller ID value from the
Conguration Manager.
Step 2
For the other elds in the dialog box, the default values are usually appropriate.
How to Configure the Sprint NIC
Step 1
In the Sprint NIC Properties dialog box, enter the Physical controller ID value from the
Conguration Manager.
Step 2
Set the Number SCPs eld to 4.
Step 3
Typically, you do not need to change any other values in this dialog box. The Number links
per SCP is standard for all Sprint NICs. Do not change the values of the other elds unless told
to do so by your ICM support provider.
How to Configure the SS7IN NIC
Step 1
In the SS7IN NIC Properties dialog box, enter the Physical controller ID value from the
Conguration Manager.
Step 2
For the other elds in the top part of the dialog box, the default values are usually appropriate.
Use the Gateway Properties section to enter values for each connection between the NIC and
the SS7IN Gateway.
Step 3
In the Description eld, enter any descriptive text you want for the connection to the SS7IN
Gateway.
ICM Installation Guide for Cisco ICM Enterprise Edition Release 7.0(0)
56
Network Interface Controller Setup
How to Configure the Nortel NIC