Installation Guide

Step 4

In the CompuCALL Sessions section, you can Add, Edit or Delete a CompuCALL session.

When you click the Add or Edit button, the Session Conﬁguration dialog box opens and allows

you to conﬁgure a session.

Step 5

In the Application X25 Links section, you can Add, Edit or Delete an X.25 application link.

When you click the Add or Edit button, the Application X25 Link Conﬁguration dialog box

opens and allows you to conﬁgure an X.25 application link.

Step 6

When you are ﬁnished with this dialog box, click OK, which returns you to the CompuCALL

Server Gateway Component Properties dialog box.

See Also

For the ACD Link Conﬁguration dialog box, How to Conﬁgure an ACD Link (page 90). For the

Session Conﬁguration dialog box, How to Conﬁgure a Session (page 91). For the Application

X25 Link Conﬁguration dialog box, How to Conﬁgure an Application X.25 Link (page 92). For

the CompuCALL Server Gateway Component Properties dialog box, How to Set CompuCALL

Server Gateway Properties (page 88).

How to Configure an ACD Link

Use the ACDLink Conﬁguration dialog box to conﬁgure the link between the CCS and the

DMS-100 ACD.

Step 1

In the Link ID ﬁeld, enter a unique digit between 1 and 8, to correspond with the ACD Link

Parameters selected in the Session Conﬁguration dialog box.

Step 2

In the Link Name ﬁeld, enter a unique name for the link of up to 40 ASCII characters.

Step 3

In the Link Interface Types section, select either X.25 or TCP.

Step 4

For either link, enter the Port Number.

Step 5

For a TCP link the Host Name is the DMS-100 ACD TCP well-known port number. For an

X.25 link the Local Address is not used.

Step 6

When you are ﬁnished entering information in the ACDLink Conﬁguration dialog box, click

OK, which returns you to the CompuCALL Server Properties dialog box.