Installation Guide

Step 4
In the Address eld, enter the IP address or hostname for the CWC Gateway.
Step 5
In the Port eld, enter the TCP port to use for connection to the CWC Gateway.
How to Configure the GKTMP NIC
Step 1
In the GKTMP NIC Properties dialog box, use the Network Interface Controller Properties to
apply settings to the NIC device.
Step 2
In the Local IP Address eld, enter the IP address or host name for the GKTMP NIC.
Step 3
In the Listening TCP Port Number eld, enter the port number that the GKTMP NIC will use
to listen for TCP/IP connections.
Step 4
In the Physical Controller ID eld, enter the Integer identier for the GKTMP NIC from the
Physical_Interface_Controller table in the ICM database.
Step 5
In the Maximum number of Sessions eld, enter the number of sessions you want the NIC to
support. The GKTMP NIC supports up to a maximum of 64 sessions.
Step 6
In the RAS Port Number eld, enter the port number used in the LCF response message for
the Registration, Admission and Status protocol address. The default is 1719.
Step 7
Check the Provide distinct LRQ destInfo alias address space box if you want the GKTMP
NIC to add a special prex character to all LRQ destinationInfo aliases before they go to the
NAM router.
Step 8
Check the Cycle through alternate EP selections box to enable the GKTMP NIC to cycle
alternate EP selections. A maximum of ten endpoint transport addresses are congurable in the
NAM.
How to Configure the INCRP NIC
Refer to the Setup and Conguration Guide for Cisco ICM Hosted Edition for information on
conguring the INCRP NIC.
How to Configure the MCI NIC
Step 1
In the MCI NIC Properties dialog box, enter the Physical controller ID value from the
Conguration Manager.
Step 2
Typically, you do not need to change any other values in this dialog box. The rst eld is
initialized to the high priority, private network IP address of the CallRouter machine. The other
values are standard defaults for all MCI NICs.
ICM Installation Guide for Cisco ICM Enterprise Edition Release 7.0(0)
55
Network Interface Controller Setup
How to Configure the GKTMP NIC