Installation Guide

For ICM Hosted Edition, select one of the other choices (Limited AW, Network AW (NAM),
Network AW (CICM)). Refer to the Setup and Configuration Guide for Cisco ICM Hosted
Edition for information on these AW types, and for specifics on installing them. The following
instructions always assume that you have chosen Standard.
Step 3
Always choose Production Mode for the Node Manager unless you are specifically told
otherwise by your ICM support provider.
Step 4
Choose the Target drive on which you want to install the software.
Note: Be sure to note the drive you are using for future reference, since this information is
required when applying software patches.
Step 5
Choose the Language from the drop-down list. This determines which online help files are
installed.
Note: If you are setting up a Distributor AW, and have already installed WebView (and chosen
the language) on the same machine as this Distributor AW, the Language field has the value
you selected when installing WebView. You may change the language if you wish, but a warning
will come up informing you that you are overriding the previous selection, and asking you to
confirm if you want to do that.
The language you select also determines the date format that is used in reports. The following
table describes date formats for each language.
Table 7: Report Date Format for Languages
Date Format in ReportsWebView UIAW Setup Language
MM/DD/YYYYEnglishEnglish (USA)
DD/MM/YYYYEnglishEnglish (UK)
YYYY/MM/DDFrenchFrench (Canada)
DD/MM/YYYYFrenchFrench (France)
DD/MM/YYYYEnglishGerman
DD/MM/YYYYEnglishSpanish
YYYY/MM/DDChineseChinese (Simplified)
YYYY/MM/DDJapaneseJapanese
YYYY/MM/DDKoreanKorean
ICM Installation Guide for Cisco ICM Enterprise Edition Release 7.0(0)
44
Admin Workstation Setup
How to Install an Admin Workstation