Installation Guide

ManualsBrandsCisco ManualsCollaboration EndpointsCisco ICM NIC BTINAP Feature

Step 3

The central ICM database resides on the Logger machine. The Purge button lets you modify

advanced settings that determine how the Logger manages the database.

To prevent the central ICM database from growing to inﬁnity, the Logger must periodically

purge old data from historical tables. By default, the Logger runs a purge every day during

which it deletes any historical data that is greater than 100 days old. You can also conﬁgure the

Logger to run a daily purge adjustment when the database ﬁlls to a deﬁned percentage (the

default is 80%). The Logger also runs a purge any time the database becomes more than 95%

full.

You can change when the purge job executes and how long you want the Logger to retain data

for each historical table. To modify these settings, click the Purge button.

The Purge Conﬁguration dialog box opens.

Step 4

Click Next.

The Network Interface Properties dialog box opens.

See Also

For the Phone Home Conﬁguration dialog box, How to Set the Phone Home Conﬁguration

(page 36). For the Outbound Option Conﬁguration dialogue box, How to Set the Outbound Option

Conﬁguration (page 37). For the Purge Conﬁguration dialog box, How to Set the Purge

Conﬁguration (page 38). For the Network Interface Properties dialog box, How to Set Network

Interface Properties (page 36).

How to Set Network Interface Properties

Step 1

Specify the private network interfaces for the A and (if applicable) B sides of the CallRouter

(Router private interfaces) and Logger (Logger private interfaces). You can use either the

host name or the IP address.

Step 2

Click Next. The Check Setup Information window opens.

See Also

For the Check Setup Information window, How to Complete Logger Setup (page 38).

How to Set the Phone Home Configuration

For more information on this feature refer to the ICM Administration Guide for Cisco ICM

Enterprise Edition and the Remote Monitoring Suite documentation.

Note: The ICM software cannot be installed on the same machine that is running the Listener

software.

ICM Installation Guide for Cisco ICM Enterprise Edition Release 7.0(0)

36

Logger Setup

How to Install a Logger