Installation Guide

Step 5
If Setup successfully copies all the files, it displays the final screen and asks whether you want
to start the ICM Node Manager.
Step 6
Click Finish to complete the component setup and optionally start the Node Manager. If you
choose to start it, the Node Manager automatically starts the other ICM processes for the
component you installed. Regardless of your choice, the main Setup screen reappears so that
you can install another component.
See Also
Cisco ICM Setup dialog box (page 19); Component Selection dialog box (page 24).
ICM Component Selection Dialog Box
In the ICM Component Selection dialog box are the following buttons, used to install the
corresponding components:
•
Admin Workstation—see How to Install an Admin Workstation (page 43)
•
Router—see How to Install a CallRouter (page 25)
•
Logger—see How to Install a Logger (page 34)
•
Network Gateway—ICM Network Gateway software is installed on a dedicated Windows
machine that provides SS7 protocol handling; refer to the Pre-Installation Planning Guide
for Cisco ICM Enterprise Edition, and see the online help
•
MEI Server—refer to the Cisco ICM Software ACD Supplement for Nortel Meridian
•
WebView—refer to the WebView Installation and Administration Guide for Cisco ICM/IPCC
Enterprise & Hosted Editions
•
Peripheral Gateway—see How to Install a Peripheral Gateway (page 61)
•
CTI Server—see How to Install CTI Server (page 95)
•
Application Bridge Server—see How to Install an Aspect Application Bridge Server (page
86)
•
CompuCALL Server Gateway—see How to Install a DMS-100 CompuCALL Server
Gateway (page 88)
•
Outbound Option Dialer—refer to the Outbound Option Setup and Configuration Guide
for Cisco ICM/IPCC Enterprise & IPCC Hosted Editions
ICM Installation Guide for Cisco ICM Enterprise Edition Release 7.0(0)
24
Introduction
ICM Component Selection Dialog Box