White Paper

Send documentation comments to [e-mail]
2-11
Cisco Fabric Manager Server Federation Deployment Guide
OL-21765-01, Cisco MDS NX-OS Release 5.x
Chapter 2 Deploying Cisco Fabric Manager Server Federation
Managing Federated Servers with Fabric Manager Client
Step 2 Click Discover.
You see the Discover New Fabric dialog box as shown in Figure 2-13.
Figure 2-13 Discover new Fabric
Step 3
In the Seed Switch list box, enter the IP Address of the seed switch.
Step 4 In the User Name field, enter the user name.
Step 5 In the password field, enter the password.
Step 6 From the Auth-Privacy drop-down list, choose the privacy protocol you want to apply.
Step 7 To open the selected fabric in a different server, select the server ID from the Server drop-down list.
Step 8 Click Discover.
Note You may receive an error message when you discover a fabric in a cluster while another Fabric
Manager Server is joining the federation. You can discover the fabric on after the installation or
upgradation is complete.
Viewing the Sessions in a Cluster
To view all the sessions in a cluster, follow these steps:
Step 1 Choose Server > Admin.
Step 2 Click the Connected Clients tab.
You see the Control Panel as shown inFigure 2-14.